[cmucl-help] CMUCL 18c building on tru64 5.1
Fausto Saporito
fausto.saporito at gmail.com
Wed Sep 3 16:29:44 UTC 2014
Hello Ray,
in the alpha-cross and alpha-target log... there are no errors. it
compiles like a knive in the butter :)
But maybe "interrupt_handle_now" could refers to a feature we excluded
from the build.
this is the "back" output
ldb> back
Backtrace:
<Frame 0x50000000 [interrupted], CODE: 0x3029472F, %INITIAL-FUNCTION,
<no LRA>, PC: 0xcfd6b7b8>
About 18c test, can I use the 19c binaries (on linux) to cross-compile
a 18c, or do I have to install a 18c linux binaries ?
thanks,
Fausto
2014-09-03 18:24 GMT+02:00 Raymond Toy <toy.raymond at gmail.com>:
>
>
>
> On Wed, Sep 3, 2014 at 4:57 AM, Fausto Saporito <fausto.saporito at gmail.com>
> wrote:
>>
>> ok.. I fixed the version problem: created a file, in alpha-target/lisp
>> directory, "version" with "-1" in it.
>> Now the version matches with kernel.core (version 0).
>>
>> But it seems a needed feature is missing:
>>
>> axpvm01.gitanes.taz> lisp -core kernel.core
>> interrupt_handle_now: No handler for signal 11?
>> LDB monitor
>>
>> ldb>
>>
>
> This is really great! But now comes the hard part.
>
> First, I would check the logs for any errors and see if they're relevant.
> Post the errors here.
>
> Second, from ldb you can try "back" to get a backtrace. That might have
> pointers to what might have gone wrong.
>
> Third, if none of the above work, you'll have to get out your debugger and
> see what is causing signal 11. This is the hard part.
>
> Since it seems you can successfully cross-compile from 19c, perhaps it would
> be easiest to go back farther and try again with 18c or something. It might
> be easier to get something going and then we can think about getting alpha
> running on a more up-to-date version of the code.
>
> Good luck!
>
>>
>>
>>
>> 2014-09-03 13:39 GMT+02:00 Fausto Saporito <fausto.saporito at gmail.com>:
>> > Hello all,
>> >
>> > ok... this is a real blocking error:
>> >
>> > axpvm01.gitanes.taz> alpha-target/lisp/lisp -core
>> > alpha-target/lisp/kernel.core
>> > WARNING: startup-code version (2) different from core version (0).
>> > You may lose big.
>> > interrupt_handle_now: No handler for signal 11?
>> > LDB monitor
>> > ldb> quit
>> > Really quit? [y]
>> >
>> > and really I cannot understand the reason.
>> > kernel.core has been generated with the same sources of the lisp
>> > frontend! Why there's this version mismatch ?
>> >
>> > I changed internals.h cause it was totally wrong (feature list
>> > section) and I copied them from internals.inc ... is it correct ?
>> > But internals.inc has much more features than cross.lisp, maybe this
>> > could be the problem...
>> >
>> > FEATURE_CMU18E = 1
>> > FEATURE_CMU18 = 1
>> > FEATURE_BSD = 1
>> > FEATURE_OSF1 = 1
>> > FEATURE_ALPHA = 1
>> > FEATURE_CMU = 1
>> > FEATURE_IEEE_FLOATING_POINT = 1
>> > FEATURE_ANSI_CL = 1
>> > FEATURE_COMMON_LISP = 1
>> > FEATURE_COMMON = 1
>> > FEATURE_HASH_NEW = 1
>> > FEATURE_RANDOM_MT19937 = 1
>> > FEATURE_UNIX = 1
>> > FEATURE_RELATIVE_PACKAGE_NAMES = 1
>> > FEATURE_MODULAR_ARITH = 1
>> > FEATURE_CONSERVATIVE_FLOAT_TYPE = 1
>> > FEATURE_PYTHON = 1
>> > FEATURE_CMU19C = 1
>> > FEATURE_CMU19 = 1
>> > FEATURE_PCL = 1
>> > <-----
>> > FEATURE_PORTABLE_COMMONLOOPS = 1
>> > FEATURE_PCL_STRUCTURES = 1
>> > FEATURE_GERDS_PCL = 1
>> > FEATURE_BOOTSTRAP = 1
>> > FEATURE_NO_PCL = 1 <-----
>> > FEATURE_NO_CLX = 1
>> > FEATURE_NO_CLM = 1
>> > FEATURE_NO_HEMLOCK = 1
>> > FEATURE_LITTLE_ENDIAN = 1
>> >
>> > Is it correct
>> >
>> > FEATURE_PCL = 1
>> >
>> > then
>> >
>> > FEATURE_NOPCL = 1
>> >
>> > ???
>> >
>> > regards,
>> > Fausto
>> >
>> > 2014-09-03 13:13 GMT+02:00 Fausto Saporito <fausto.saporito at gmail.com>:
>> >> This is trivial .. I suppose.
>> >> I'm using standard Tru64 5.1b C compiler, but it seems generates a
>> >> Depend file gmake doesn't like too much :-)
>> >> I'm using gmake 3.80, is there a mandatory version ?
>> >>
>> >> gmake: Entering directory `/usr/users/fausap/CMU/alpha-target/lisp'
>> >> Depends:454: *** missing separator. Stop.
>> >> gmake: Leaving directory `/usr/users/fausap/CMU/alpha-target/lisp'
>> >>
>> >> this code starts at line 454
>> >>
>> >> struct array {
>> >> lispobj header;
>> >> lispobj fill_pointer;
>> >> lispobj fill_pointer_p;
>> >> lispobj elements;
>> >> lispobj data;
>> >> lispobj displacement;
>> >> lispobj displaced_p;
>> >> lispobj dimensions[1];
>> >> };
>> >>
>> >> thanks,
>> >> Fausto
>> >>
>> >> 2014-09-03 11:39 GMT+02:00 Fausto Saporito <fausto.saporito at gmail.com>:
>> >>> Ohhhh ... BIG NeWS!
>> >>>
>> >>> 19c works! Cross compiling was fine.
>> >>> Now if I understood well, I have to move all the alpha-target
>> >>> directory in Tru64 and recompile... correct ?
>> >>> Using src/tools/build-world.sh script ?
>> >>>
>> >>> thanks
>> >>> Fausto
>> >>>
>> >>>
>> >>> 2014-09-03 11:28 GMT+02:00 Fausto Saporito
>> >>> <fausto.saporito at gmail.com>:
>> >>>> Hello all,
>> >>>>
>> >>>> I saw there're some patches for 19c and 19d and I found how to apply
>> >>>> them.
>> >>>> The question is: how can I update the lisp.core ? Is it needed ? Or
>> >>>> do
>> >>>> I have to load each time those patches ?
>> >>>>
>> >>>> thanks,
>> >>>> Fausto
>> >>>>
>> >>>>
>> >>>> 2014-09-03 8:41 GMT+02:00 Fausto Saporito
>> >>>> <fausto.saporito at gmail.com>:
>> >>>>> Hello Ray,
>> >>>>>
>> >>>>> no luck with 19d. But maybe it has the double-double support too...
>> >>>>>
>> >>>>> I have the same errors, but instead of sigsegv at the end, I got a
>> >>>>> stack overflow:
>> >>>>>
>> >>>>> Control stack overflow
>> >>>>> [Condition of type STACK-OVERFLOW]
>> >>>>>
>> >>>>> Restarts:
>> >>>>> 0: [CONTINUE] Blow this file
>> >>>>> 1: Return NIL from load of "target:tools/worldcom".
>> >>>>> 2: [ABORT ] Return to Top-Level.
>> >>>>>
>> >>>>> Debug (type H for help)
>> >>>>>
>> >>>>> (YELLOW-ZONE-HIT)
>> >>>>> Source:
>> >>>>> ; File: target:code/interr.lisp
>> >>>>> (ERROR 'STACK-OVERFLOW)
>> >>>>>
>> >>>>> and in compile-compiler.log I found again a DOUBLE-DOUBLE reference:
>> >>>>>
>> >>>>> ; Comment: $Header:
>> >>>>> /project/cmucl/cvsroot/src/compiler/new-assem.lisp,v 1.34 2004/08/02
>> >>>>> 16:04:42 cwang Exp $
>> >>>>>
>> >>>>> ; Compiling DEFUN SEGMENT-MAP-OUTPUT:
>> >>>>>
>> >>>>> Bound is not *, a DOUBLE-DOUBLE-FLOAT or a list of a
>> >>>>> DOUBLE-DOUBLE-FLOAT: 0
>> >>>>>
>> >>>>> Aborting...
>> >>>>>
>> >>>>> I'll try with 19c
>> >>>>>
>> >>>>> 2014-09-03 8:29 GMT+02:00 Fausto Saporito
>> >>>>> <fausto.saporito at gmail.com>:
>> >>>>>> Hello Ray,
>> >>>>>>
>> >>>>>> I started with 19d, but I have this strange error:
>> >>>>>>
>> >>>>>> ; Error: (during macroexpansion)
>> >>>>>> ;
>> >>>>>> ; Error in function META-SC-OR-LOSE:
>> >>>>>> ; DOUBLE-DOUBLE-REG is not a defined storage class.
>> >>>>>> ; ;
>> >>>>>>
>> >>>>>> ; Error: (during macroexpansion)
>> >>>>>> ;
>> >>>>>> ; Error in function META-SC-OR-LOSE:
>> >>>>>> ; COMPLEX-DOUBLE-DOUBLE-REG is not a defined storage class.
>> >>>>>>
>> >>>>>> but in 19d there shouldn't be support for DOUBLE-DOUBLE ... correct
>> >>>>>> ?
>> >>>>>>
>> >>>>>> I'm using 19d binaries to cross-build 19d
>> >>>>>>
>> >>>>>> 2014-09-03 4:17 GMT+02:00 Raymond Toy <toy.raymond at gmail.com>:
>> >>>>>>>
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> On Tue, Sep 2, 2014 at 4:53 PM, Fausto Saporito
>> >>>>>>> <fausto.saporito at gmail.com>
>> >>>>>>> wrote:
>> >>>>>>>>
>> >>>>>>>> Hello Raymond,
>> >>>>>>>>
>> >>>>>>>> thanks for these hints about cross.lisp
>> >>>>>>>> I put in the proper section the unwanted feature.
>> >>>>>>>>
>> >>>>>>>> So, if I force the redefinition of those symbols at the end of
>> >>>>>>>> alpha-cross compiling phase, alpha-target starts but I noticed
>> >>>>>>>> this
>> >>>>>>>> error among the others:
>> >>>>>>>>
>> >>>>>>>> ; File: /home/fausap/CMUCL/git-ver/cmucl/src/code/lispinit.lisp
>> >>>>>>>>
>> >>>>>>>> ; In: DEFUN SLEEP
>> >>>>>>>>
>> >>>>>>>> ; (ERROR 'SIMPLE-TYPE-ERROR
>> >>>>>>>> ; :FORMAT-CONTROL "Invalid argument to SLEEP: ~S.~%~
>> >>>>>>>> ; Must be a non-negative, non-complex number."
>> >>>>>>>> ; :FORMAT-ARGUMENTS ...)
>> >>>>>>>> ; Note: Deleting unreachable code.
>> >>>>>>>> ;
>> >>>>>>>>
>> >>>>>>>> DOUBLE-DOUBLE-FLOAT fell through ECASE expression.
>> >>>>>>>> Wanted one of (REAL FLOAT OR SINGLE-FLOAT DOUBLE-FLOAT RATIONAL
>> >>>>>>>> INTEGER).
>> >>>>>>>>
>> >>>>>>>> it's very strange... I disabled double-double... why I have this
>> >>>>>>>> error ?
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> I think it's a mismatch between what the cross compiler has and
>> >>>>>>> what the
>> >>>>>>> host compiler has. I've never figured this out.
>> >>>>>>>
>> >>>>>>> So, I think it's best to start with a lisp without double-double
>> >>>>>>> support.
>> >>>>>>>
>> >>>>>>> Support for double-double was apparently done by 19e, so your best
>> >>>>>>> bet is to
>> >>>>>>> do a checkout from 19d. I think everything that you've done up to
>> >>>>>>> now still
>> >>>>>>> applies.
>> >>>>>>>
>> >>>>>>> Once that is done, we can consider adding double-double for alpha.
>> >>>>>>> It's
>> >>>>>>> relatively easy, but you'll have to write a bunch of vops. They
>> >>>>>>> can probably
>> >>>>>>> be copied almost verbatim from the sparc or ppc ports with small
>> >>>>>>> changes in
>> >>>>>>> the actual instructions.
>> >>>>>>>
>> >>>>>>>>
>> >>>>>>>> This is my features list in cross.lisp (I removed
>> >>>>>>>> extern-alien-name,
>> >>>>>>>> fixup, etc... I don't know what they are doing... so maybe I can
>> >>>>>>>> put
>> >>>>>>>> back later)
>> >>>>>>>>
>> >>>>>>>> ;;; Cross-compile script to build a alpha core using x86 as the
>> >>>>>>>> ;;; compiling system. This needs work!
>> >>>>>>>>
>> >>>>>>>> (in-package :cl-user)
>> >>>>>>>>
>> >>>>>>>> ;;; Rename the X86 package and backend so that new-backend does
>> >>>>>>>> the
>> >>>>>>>> ;;; right thing.
>> >>>>>>>> (rename-package "X86" "OLD-X86" '("OLD-VM"))
>> >>>>>>>> (setf (c:backend-name c:*native-backend*) "OLD-X86")
>> >>>>>>>>
>> >>>>>>>> (c::new-backend "ALPHA"
>> >>>>>>>> ;; Features to add here
>> >>>>>>>> '(:alpha
>> >>>>>>>> :relative-package-names ; Relative package names
>> >>>>>>>> from
>> >>>>>>>> Allegro
>> >>>>>>>> :conservative-float-type
>> >>>>>>>> :hash-new
>> >>>>>>>> :random-mt19937 ; MT-19937 generator
>> >>>>>>>> :cmu ; Announce this is CMUCL
>> >>>>>>>> :cmu20 :cmu20b ; Current version
>> >>>>>>>> identifier
>> >>>>>>>> :osf1
>> >>>>>>>> :bsd
>> >>>>>>>> :unix
>> >>>>>>>> )
>> >>>>>>>> ;; Features to remove from current *features* here
>> >>>>>>>> '(:sparc-v8 :sparc-v7 :sparc-v9 :sparc
>> >>>>>>>> ;; Other architectures we aren't using. Particularly
>> >>>>>>>> important
>> >>>>>>>> ;; to get rid of sse2 and x87 so we don't accidentally try
>> >>>>>>>> to
>> >>>>>>>> ;; compile the x87/sse2 float support on sparc, which won't
>> >>>>>>>> work.
>> >>>>>>>> :x86 :x86-bootstrap :sse2 :x87 :i486
>> >>>>>>>> :mips :complex-fp-vops
>> >>>>>>>> ;; Really old stuff that should have been removed long ago.
>> >>>>>>>> :propagate-fun-type :propagate-float-type
>> >>>>>>>> :constrain-float-type
>> >>>>>>>> :double-double
>> >>>>>>>> :linkage-table
>> >>>>>>>> :stack-checking ; Throw error if we run
>> >>>>>>>> out of
>> >>>>>>>> stack
>> >>>>>>>> :heap-overflow-check ; Throw error if we run
>> >>>>>>>> out of
>> >>>>>>>> ; heap (This requires
>> >>>>>>>> gencgc!)
>> >>>>>>>> :gencgc ; Generational GC
>> >>>>>>>> :modular-arith ; Modular arithmetic
>> >>>>>>>> :executable
>> >>>>>>>> ;; Other OSes were not using
>> >>>>>>>> :openbsd :freebsd :glibc2 :linux :mach-o :darwin :sunos
>> >>>>>>>> :svr4
>> >>>>>>>> :solaris :sun4
>> >>>>>>>> :pentium
>> >>>>>>>> :long-float
>> >>>>>>>> :new-random
>> >>>>>>>> :small
>> >>>>>>>> :mp))
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> One last thing: remove :alien-callback too. Alpha doesn't support
>> >>>>>>> that.
>> >>>>>>>
>> >>>>>>> Hopefully this will get us farther along....
>> >>>>>>>
>> >>>>>>> --
>> >>>>>>> Ray
>> >>>>>>>
>> >>>>>>>
>
>
More information about the cmucl-help
mailing list